Main points of maintenance of concrete mixer

1. Regularly check the gap between the blade and the concrete mixer tank

Make a reasonable maintenance cycle according to the use of the concrete mixer. The higher the frequency of use, the shorter the maintenance cycle and the lower the service cycle. It can be extended appropriately to prevent the mortar from dripping into the gap and causing damage to the concrete mixer;

2. Regularly check the oil filling of the shaft end

The shaft end is easily affected by penetrating mortar. The oil injection device at the shaft end should be checked regularly, and the cement mortar on the bearing and shaft sleeve should be cleaned in time to ensure the life of the concrete mixer;

3. Regularly check the condition of the dust collector

The filter or cloth bag of the centralized dust collector needs to be cleaned frequently, and if it is not clean, it should be replaced in time. In addition, pay attention to the operating procedures and do not operate in violation of regulations.

TRUSEEN,Loyally provide you with the best products and services.

Tel:0086-371-86238892 | +86 15617732826

Email:admin@truseen-machinery.com