Mortar is widely used in engineering projects and plays a great role.Machine sand equipment is a machine to produce machine sand, a full set of machine sand equipment according to the model of machine sand machine and machine sand output, particle size is different.

Mix to make mortar to should be equipped with and ash pool, put water inside the pool first, put white ash cream inside the pool, scrape with three-tooth iron rake to move back and forth.In addition, dry mix cement and sand in the pool, until the color is uniform, and then use a spade to mix the cement sand evenly scattered into the pool, at the same time with a three-tooth rake scraping back and forth, until the color is uniform, consistency is appropriate.

Mix when making a few mortar, can use on iron plate "dry 3 wet 3 law" make up.This method is the first cement and sand stacked in proportion to one side of the iron plate, and then with a spade turned to the other side of the mixed pile, and then turned back, a total of three times, to get even mixing materials.

Dig a pit in the middle of mixing material, pour water into the pit, and put the white plaster into the pit, break the white plaster with the iron rake, then cooperate with the spade and the iron rake, turn over, stir and add water at least three times, until it meets the requirements.

TRUSEEN,Loyally provide you with the best products and services.

Tel:0086-371-86238892 | +86 15617732826

Email:admin@truseen-machinery.com