The water-borne concrete water-based method first uses a water-based silane-based water-repellent waterproofing agent to prevent the penetration of moisture, and then applies a water-based silicone transparent topcoat or a water-based fluorine transparent topcoat of a water-based concrete transparent varnish with a combination of silicic acid and silicon-acrylic. It can ensure that the texture of the fresh concrete is not damaged, and can greatly improve the long-term performance of the fresh concrete.

There are the following conventional construction methods:

1. Pure transparent protection method: practical scale: the quality of clear water pouring is very good, the clean water texture needs to be completely preserved, and defects are allowed to exist.

2. Transparent part repair method: practical scale: the quality of fresh-water concrete is good, the clean-water texture and small-area defects are preserved, and only large-area defects are repaired.

3, one-sided coloring repair method: practical scale: the quality of individual pouring of water, the base surface color difference is more significant, honeycomb hemp surface is more.

4. The practical scale of the method of imitation of clear water: Poor quality of fresh water pouring, relatively large leakage and sand leakage, large area of honeycomb surface, or construction on the surface of non-clear water concrete.

TRUSEEN,Loyally provide you with the best products and services.

Tel:0086-371-86238892 | +86 15617732826

Email:admin@truseen-machinery.com